CSS color-mix()

Adam Argyle
Adam Argyle

The CSS color-mix() function lets you mix colors, in any of the supported color spaces, right from your CSS.

Browser Support

  • 111
  • 111
  • 113
  • 16.2

Source

Before color-mix(), to darken, lighten, or desaturate a color, developers used CSS preprocessors or calc() on color channels.

Before with SCSS
.color-mixing-with-sass {
  /* Sass: equally mix red with white */
  --red-white-mix: color.mix(red, white);
}

Sass has done great work staying ahead of the color CSS specification. There has not, however, been a real way to mix colors in CSS. To get close you need to do math of partial color values. Here's a reduced example of how CSS may simulate mixing today:

Before with HSL
.color-mixing-with-vanilla-css-before {
  --lightness: 50%;
  --red: hsl(0 50% var(--lightness));

  /* add "white" to red
     by adding 25% to the lightness channel
  */
  --lightred: hsl(0 50% calc(var(--lightness) + 25%);
}

color-mix() brings the ability to mix colors to CSS. Developers can choose which color space they mix in and how dominant each color should be in the mix.

After
.color-mixing-after {
  /* equally mix red with white */
  --red-white-mix: color-mix(in oklab, red, white);

  /* equally mix red with white in srgb */
  --red-white-mix-srgb: color-mix(in srgb, red, white);
}

That's what we want. Flexibility, power and fully featured APIs. Love it.

Mixing colors in CSS

CSS exists in a multiple color space and color gamut world, and because of this it's not optional to specify the color space for mixing. Furthermore, different color spaces can drastically change the results of a mix, so knowing the effects of a color space will help you get the results you need.

For an interactive introduction, try this color-mix() tool: - Explore the effects of each color space. - Explore the effects of hue interpolation when mixing in a cylindrical color space (lch, oklch, hsl, and hwb). - Change the colors being mixed by clicking either of the top two color boxes. - Use the slider to change the mixing ratio. - Generated color-mix() CSS code available at the bottom.

Mixing in the various color spaces

The default color space for mixing (and gradients) is oklab. It provides consistent results. You can specify alternative color spaces too, to tailor the mix to your needs.

Take black and white for example. The color space they mix in won't make that big of a difference, right? Wrong.

color-mix(in srgb, black, white);
color-mix(in srgb-linear, black, white);
color-mix(in lch, black, white);
color-mix(in oklch, black, white);
color-mix(in lab, black, white);
color-mix(in oklab, black, white);
color-mix(in xyz, black, white);
7 color spaces (srgb, linear-srgb, lch, oklch, lab, oklab, xyz) each show their results of mixing black and white. Roughly 5 different shades are shown, demonstrating that each color space will even mix to a gray differently.
Try the demo

It does have a big effect!

Take blue and white for another example. I chose this specifically because it's a case where a color space's shape can affect the results. In this case it's that most color spaces go purple while traveling from white to blue. It also shows how oklab is such a reliable color space for mixing, it's the closest to most people’s expectations of mixing white and blue (no purple).

color-mix(in srgb, blue, white);
color-mix(in srgb-linear, blue, white);
color-mix(in lch, blue, white);
color-mix(in oklch, blue, white);
color-mix(in lab, blue, white);
color-mix(in oklab, blue, white);
color-mix(in xyz, blue, white);
7 color spaces (srgb, linear-srgb, lch, oklch, lab, oklab, xyz) each shown having different results. Many are pink or purple, few are actually still blue.
Try the demo

Learning the effects of a color space with color-mix() is great knowledge for making gradients too. Color 4 syntax also allows gradients to specify the color space, where a gradient shows the mix over an area of space.

.black-to-white-gradient-in-each-space {
  --srgb: linear-gradient(to right in srgb, black, white);
  --srgb-linear: linear-gradient(to right in srgb-linear, black, white);
  --lab: linear-gradient(to right in lab, black, white);
  --oklab: linear-gradient(to right in oklab, black, white);
  --lch: linear-gradient(to right in lch, black, white);
  --oklch: linear-gradient(to right in oklch, black, white);
  --hsl: linear-gradient(to right in hsl, black, white);
  --hwb: linear-gradient(to right in hwb, black, white);
  --xyz: linear-gradient(to right in xyz, black, white);
  --xyz-d50: linear-gradient(to right in xyz-d50, black, white);
  --xzy-d65: linear-gradient(to right in xyz-d65, black, white);
}
Black to white gradients in different color spaces.
Try the demo

If you're wondering which color space is "the best," there isn't one. That's why there are so many options! There also wouldn't be new color spaces being invented either (see oklch and oklab), if one was "the best." Each color space can have a unique moment to shine and be the right choice.

For example, if you want a vibrant mix result, use hsl or hwb. In the following demo, two vibrant colors (magenta and lime) are mixed together and hsl and hwb both produce a vibrant result, while srgb and oklab produce unsaturated colors.

The mix results as described in the preceding paragraph.
Try the demo

If you want consistency and subtlety, use oklab. In the following demo which mixes blue and black, hsl and hwb produce overly vibrant and hue shifted colors while srgb and oklab produce a darker blue.

The mix results as described in the preceding paragraph.
Try the demo

Spend five minutes with the color-mix() playground, testing different colors and spaces, and you'll start to get a feel for each space's advantages. Also expect more guidance around color spaces to happen as we all adjust to their potentials in our user interfaces.

Adjusting the hue interpolation method

If you've chosen to mix in a cylindrical color space, essentially any color space with a h hue channel that accepts an angle, you can specify if the interpolation goes shorter, longer, decreasing, and increasing. This is covered well in this HD Color Guide if you want to learn more.

Here's the same blue to white mix example, but this time, it's only in the cylindrical spaces with different hue interpolation methods.

The mix results as described in the preceding paragraph.
Try the demo

Here's another Codepen I made to help visualize hue interpolation, but specifically for gradients. I believe this will help you understand how each color space produces its mix result when hue interpolation is specified though, give it a study!

Mixing with varying color syntaxes

So far we've mostly mixed CSS named colors, like blue and white. CSS color mixing is ready to mix colors that are from two different color spaces. This is another reason it's key to specify the color space for the mixing, as it sets the common space for when the two colors aren't in the same space.

color-mix(in oklch, hsl(200deg 50% 50%), color(display-p3 .5 0 .5));

In the previous example, the hsl and display-p3 will be converted to oklch and then mixed. Pretty cool and flexible.

Adjusting the mixing ratios

It's not very likely that every time you mix you want equal parts of each color, like most of the examples so far have shown. Good news, there's a syntax for articulating how much of each color should be seen in the resulting mix.

To start this topic, here's a sample of mixes that are all equivalent (and from the spec):

.ratios-syntax-examples {
  /* omit the percentage for equal mixes */
  color: color-mix(in lch, purple, plum);
  color: color-mix(in lch, plum, purple);

  /* percentage can go on either side of the color */
  color: color-mix(in lch, purple 50%, plum 50%);
  color: color-mix(in lch, 50% purple, 50% plum);

  /* percentage on just one color? other color gets the remainder */
  color: color-mix(in lch, purple 50%, plum);
  color: color-mix(in lch, purple, plum 50%);

  /* percentages > 100% are equally clamped */
  color: color-mix(in lch, purple 80%, plum 80%);
  /* above mix is clamped to this */
  color: color-mix(in lch, purple 50%, plum 50%);
}

I find these examples to illuminate the edge cases well. The first set of examples show how 50% isn't required but can be optionally specified. The last example shows an interesting case for when the ratios exceed 100% when added together, they're equally clamped to total 100%.

Notice too, that if only one color specifies a ratio, the other is assumed to be the remainder to 100%. Here's a few more examples to help illustrate this behavior.

color-mix(in lch, purple 40%, plum) /* plum assigned 60% */
color-mix(in lch, purple, 60% plum) /* purple assigned 40% */
color-mix(in lch, purple 40%, plum 60%) /* no auto assignments */

These examples illustrate two rules: 1. When ratios exceed 100%, they're clamped and equally distributed. 1. When only one ratio is provided, the other color is set to 100 minus that ratio.

The last rule is slightly less obvious; what happens if percentages are supplied for both colors and they don't add up to 100%?

color-mix(in lch, purple 20%, plum 20%)

This combination of a color-mix() results in transparency, 40% transparency. When ratios don't add up to 100%, then the resulting mix won't be opaque. Neither of the colors will be fully mixed.

Nesting color-mix()

Like all of CSS, nesting is handled well and as expected; inner functions will resolve first and return their values to the parent context.

color-mix(in lch, purple 40%, color-mix(plum, white))

Feel free to nest as much as you need to get the result you're working towards.

Building a light and dark color scheme

Let's build color schemes with color-mix()!

A basic color scheme

In the following CSS, a light and dark theme are created based on a brand hex color. The light theme creates two dark blue text colors and a very light white background surface color. Then in a dark preference media query, the custom properties are assigned new colors so the background is dark and the text colors are light.

:root {
  /* a base brand color */
  --brand: #0af;

  /* very dark brand blue */
  --text1: color-mix(in oklab, var(--brand) 25%, black);
  --text2: color-mix(in oklab, var(--brand) 40%, black);

  /* very bright brand white */
  --surface1: color-mix(in oklab, var(--brand) 5%, white);
}

@media (prefers-color-scheme: dark) {
  :root {
    --text1: color-mix(in oklab, var(--brand) 15%, white);
    --text2: color-mix(in oklab, var(--brand) 40%, white);
    --surface1: color-mix(in oklab, var(--brand) 5%, black);
  }
}

All of this is accomplished by mixing white or black into a brand color.

Intermediate color scheme

This can be taken a step further by adding more than light and dark themes. In the following demo, changes to the radio group update an attribute on the HTML tag [color-scheme="auto"] which then enables selectors to conditionally apply a color theme.

This intermediate demo also shows a color theming technique where all of the theme colors are listed in :root. This makes them easy to see all together and adjust if needed. Later in the stylesheet, you can use the variables as they're defined. This saves hunting through the stylesheet for color manipulations as they're all contained in the initial :root block.

More interesting use cases

Ana Tudor has a great demo with a few use cases for study:

Debugging color-mix() with DevTools

Chrome DevTools has great support for color-mix(). It recognizes and highlights the syntax, creates a preview of the mix right next to the style in the Styles pane and allows picking alternative colors.

It will look something like this in the DevTools:

A screenshot of Chrome DevTools inspecting color-mix syntax.

Happy mixing y'all!