chrome.events

Description

The chrome.events namespace contains common types used by APIs dispatching events to notify you when something interesting happens.

An Event is an object that allows you to be notified when something interesting happens. Here's an example of using the chrome.alarms.onAlarm event to be notified whenever an alarm has elapsed:

chrome.alarms.onAlarm.addListener(function(alarm) {
  appendToLog('alarms.onAlarm --'
              + ' name: '          + alarm.name
              + ' scheduledTime: ' + alarm.scheduledTime);
});

As the example shows, you register for notification using addListener(). The argument to addListener() is always a function that you define to handle the event, but the parameters to the function depend on which event you're handling. Checking the documentation for alarms.onAlarm, you can see that the function has a single parameter: an alarms.Alarm object that has details about the elapsed alarm.

Example APIs using Events: alarms, i18n, identity, runtime. Most chrome APIs do.

Declarative Event Handlers

The declarative event handlers provide a means to define rules consisting of declarative conditions and actions. Conditions are evaluated in the browser rather than the JavaScript engine which reduces roundtrip latencies and allows for very high efficiency.

Declarative event handlers are used for example in the Declarative Web Request API and Declarative Content API. This page describes the underlying concepts of all declarative event handlers.

Rules

The simplest possible rule consists of one or more conditions and one or more actions:

var rule = {
  conditions: [ /* my conditions */ ],
  actions: [ /* my actions */ ]
};

If any of the conditions is fulfilled, all actions are executed.

In addition to conditions and actions you may give each rule an identifier, which simplifies unregistering previously registered rules, and a priority to define precedences among rules. Priorities are only considered if rules conflict each other or need to be executed in a specific order. Actions are executed in descending order of the priority of their rules.

var rule = {
  id: "my rule",  // optional, will be generated if not set.
  priority: 100,  // optional, defaults to 100.
  conditions: [ /* my conditions */ ],
  actions: [ /* my actions */ ]
};

Event objects

Event objects may support rules. These event objects don't call a callback function when events happen but test whether any registered rule has at least one fulfilled condition and execute the actions associated with this rule. Event objects supporting the declarative API have three relevant methods: events.Event.addRules, events.Event.removeRules, and events.Event.getRules.

Adding rules

To add rules call the addRules() function of the event object. It takes an array of rule instances as its first parameter and a callback function that is called on completion.

var rule_list = [rule1, rule2, ...];
function addRules(rule_list, function callback(details) {...});

If the rules were inserted successfully, the details parameter contains an array of inserted rules appearing in the same order as in the passed rule_list where the optional parameters id and priority were filled with the generated values. If any rule is invalid, e.g., because it contained an invalid condition or action, none of the rules are added and the runtime.lastError variable is set when the callback function is called. Each rule in rule_list must contain a unique identifier that is not currently used by another rule or an empty identifier.

Removing rules

To remove rules call the removeRules() function. It accepts an optional array of rule identifiers as its first parameter and a callback function as its second parameter.

var rule_ids = ["id1", "id2", ...];
function removeRules(rule_ids, function callback() {...});

If rule_ids is an array of identifiers, all rules having identifiers listed in the array are removed. If rule_ids lists an identifier, that is unknown, this identifier is silently ignored. If rule_ids is undefined, all registered rules of this extension are removed. The callback() function is called when the rules were removed.

Retrieving rules

To retrieve a list of currently registered rules, call the getRules() function. It accepts an optional array of rule identifiers with the same semantics as removeRules and a callback function.

var rule_ids = ["id1", "id2", ...];
function getRules(rule_ids, function callback(details) {...});

The details parameter passed to the callback() function refers to an array of rules including filled optional parameters.

Performance

To achieve maximum performance, you should keep the following guidelines in mind.

Register and unregister rules in bulk. After each registration or unregistration, Chrome needs to update internal data structures. This update is an expensive operation.

Instead of:

var rule1 = {...};
var rule2 = {...};
chrome.declarativeWebRequest.onRequest.addRules([rule1]);
chrome.declarativeWebRequest.onRequest.addRules([rule2]);

prefer:

var rule1 = {...};
var rule2 = {...};
chrome.declarativeWebRequest.onRequest.addRules([rule1, rule2]);

Prefer substring matching over regular expressions in an events.UrlFilter. Substring based matching is extremely fast.

Instead of:

var match = new chrome.declarativeWebRequest.RequestMatcher({
    url: {urlMatches: "example.com/[^?]*foo" } });

prefer:

var match = new chrome.declarativeWebRequest.RequestMatcher({
    url: {hostSuffix: "example.com", pathContains: "foo"} });

If many rules that share the same actions, merge the rules into one. Rules trigger their actions as soon as a single condition is fulfilled. This speeds up the matching and reduces memory consumption for duplicate action sets.

Instead of:

var condition1 = new chrome.declarativeWebRequest.RequestMatcher({
    url: { hostSuffix: 'example.com' } });
var condition2 = new chrome.declarativeWebRequest.RequestMatcher({
    url: { hostSuffix: 'foobar.com' } });
var rule1 = { conditions: [condition1],
              actions: [new chrome.declarativeWebRequest.CancelRequest()]};
var rule2 = { conditions: [condition2],
              actions: [new chrome.declarativeWebRequest.CancelRequest()]};
chrome.declarativeWebRequest.onRequest.addRules([rule1, rule2]);

prefer:

  var rule = { conditions: [condition1, condition2],
                actions: [new chrome.declarativeWebRequest.CancelRequest()]};
  chrome.declarativeWebRequest.onRequest.addRules([rule]);

Filtered events

Filtered events are a mechanism that allows listeners to specify a subset of events that they are interested in. A listener that uses a filter won't be invoked for events that don't pass the filter, which makes the listening code more declarative and efficient. A service worker need not be woken up to handle events it doesn't care about.

Filtered events are intended to allow a transition from manual filtering code like this:

chrome.webNavigation.onCommitted.addListener(function(e) {
  if (hasHostSuffix(e.url, 'google.com') ||
      hasHostSuffix(e.url, 'google.com.au')) {
    // ...
  }
});

into this:

chrome.webNavigation.onCommitted.addListener(function(e) {
  // ...
}, {url: [{hostSuffix: 'google.com'},
          {hostSuffix: 'google.com.au'}]});

Events support specific filters that are meaningful to that event. The list of filters that an event supports will be listed in the documentation for that event in the "filters" section.

When matching URLs (as in the example above), event filters support the same URL matching capabilities as expressible with a events.UrlFilter, except for scheme and port matching.

Types

Event

An object which allows the addition and removal of listeners for a Chrome event.

Properties

  • addListener

    void

    Registers an event listener callback to an event.

    The addListener function looks like:

    (callback: H) => {...}

    • callback

      H

      Called when an event occurs. The parameters of this function depend on the type of event.

  • addRules

    void

    Registers rules to handle events.

    The addRules function looks like:

    (rules: Rule<anyany>[], callback?: function) => {...}

    • rules

      Rule<anyany>[]

      Rules to be registered. These do not replace previously registered rules.

    • callback

      function optional

      The callback parameter looks like:

      (rules: Rule<anyany>[]) => void

      • rules

        Rule<anyany>[]

        Rules that were registered, the optional parameters are filled with values.

  • getRules

    void

    Returns currently registered rules.

    The getRules function looks like:

    (ruleIdentifiers?: string[], callback: function) => {...}

    • ruleIdentifiers

      string[] optional

      If an array is passed, only rules with identifiers contained in this array are returned.

    • callback

      function

      The callback parameter looks like:

      (rules: Rule<anyany>[]) => void

      • rules

        Rule<anyany>[]

        Rules that were registered, the optional parameters are filled with values.

  • hasListener

    void

    The hasListener function looks like:

    (callback: H) => {...}

    • callback

      H

      Listener whose registration status shall be tested.

    • returns

      boolean

      True if callback is registered to the event.

  • hasListeners

    void

    The hasListeners function looks like:

    () => {...}

    • returns

      boolean

      True if any event listeners are registered to the event.

  • removeListener

    void

    Deregisters an event listener callback from an event.

    The removeListener function looks like:

    (callback: H) => {...}

    • callback

      H

      Listener that shall be unregistered.

  • removeRules

    void

    Unregisters currently registered rules.

    The removeRules function looks like:

    (ruleIdentifiers?: string[], callback?: function) => {...}

    • ruleIdentifiers

      string[] optional

      If an array is passed, only rules with identifiers contained in this array are unregistered.

    • callback

      function optional

      The callback parameter looks like:

      () => void

Rule

Description of a declarative rule for handling events.

Properties

  • actions

    any[]

    List of actions that are triggered if one of the conditions is fulfilled.

  • conditions

    any[]

    List of conditions that can trigger the actions.

  • id

    string optional

    Optional identifier that allows referencing this rule.

  • priority

    number optional

    Optional priority of this rule. Defaults to 100.

  • tags

    string[] optional

    Tags can be used to annotate rules and perform operations on sets of rules.

UrlFilter

Filters URLs for various criteria. See event filtering. All criteria are case sensitive.

Properties

  • cidrBlocks

    string[] optional

    Chrome 123+

    Matches if the host part of the URL is an IP address and is contained in any of the CIDR blocks specified in the array.

  • hostContains

    string optional

    Matches if the host name of the URL contains a specified string. To test whether a host name component has a prefix 'foo', use hostContains: '.foo'. This matches 'www.foobar.com' and 'foo.com', because an implicit dot is added at the beginning of the host name. Similarly, hostContains can be used to match against component suffix ('foo.') and to exactly match against components ('.foo.'). Suffix- and exact-matching for the last components need to be done separately using hostSuffix, because no implicit dot is added at the end of the host name.

  • hostEquals

    string optional

    Matches if the host name of the URL is equal to a specified string.

  • hostPrefix

    string optional

    Matches if the host name of the URL starts with a specified string.

  • hostSuffix

    string optional

    Matches if the host name of the URL ends with a specified string.

  • originAndPathMatches

    string optional

    Matches if the URL without query segment and fragment identifier matches a specified regular expression. Port numbers are stripped from the URL if they match the default port number. The regular expressions use the RE2 syntax.

  • pathContains

    string optional

    Matches if the path segment of the URL contains a specified string.

  • pathEquals

    string optional

    Matches if the path segment of the URL is equal to a specified string.

  • pathPrefix

    string optional

    Matches if the path segment of the URL starts with a specified string.

  • pathSuffix

    string optional

    Matches if the path segment of the URL ends with a specified string.

  • ports

    (number | number[])[] optional

    Matches if the port of the URL is contained in any of the specified port lists. For example [80, 443, [1000, 1200]] matches all requests on port 80, 443 and in the range 1000-1200.

  • queryContains

    string optional

    Matches if the query segment of the URL contains a specified string.

  • queryEquals

    string optional

    Matches if the query segment of the URL is equal to a specified string.

  • queryPrefix

    string optional

    Matches if the query segment of the URL starts with a specified string.

  • querySuffix

    string optional

    Matches if the query segment of the URL ends with a specified string.

  • schemes

    string[] optional

    Matches if the scheme of the URL is equal to any of the schemes specified in the array.

  • urlContains

    string optional

    Matches if the URL (without fragment identifier) contains a specified string. Port numbers are stripped from the URL if they match the default port number.

  • urlEquals

    string optional

    Matches if the URL (without fragment identifier) is equal to a specified string. Port numbers are stripped from the URL if they match the default port number.

  • urlMatches

    string optional

    Matches if the URL (without fragment identifier) matches a specified regular expression. Port numbers are stripped from the URL if they match the default port number. The regular expressions use the RE2 syntax.

  • urlPrefix

    string optional

    Matches if the URL (without fragment identifier) starts with a specified string. Port numbers are stripped from the URL if they match the default port number.

  • urlSuffix

    string optional

    Matches if the URL (without fragment identifier) ends with a specified string. Port numbers are stripped from the URL if they match the default port number.